The grounding pin of the Brazil Power Plug plays a core role in preventing electric shock accidents. Its core principle is to direct the current that may endanger personal safety to the ground. When the insulation material inside the appliance fails due to aging, damage, etc., the metal casing may be charged due to contact with live parts. At this time, the grounding pin provides a low-resistance conduction path for the leakage current through the electrical connection with the metal casing of the appliance. The leakage current will preferentially flow into the earth through this path rather than forming a loop through the human body, thereby effectively blocking the occurrence of electric shock accidents. At the same time, this process will trigger the circuit breaker to automatically trip due to overload current, quickly cut off the power supply, and form a double safety protection mechanism.
The grounding pin adopts an extended structure design, and its physical length is significantly longer than the live and neutral pins. This differentiated design is based on electrical safety logic: when the plug is inserted into the socket, the grounding pin will first contact the grounding terminal inside the socket, and the grounding protection system will be established first; during the unplugging process, the conductive pin will first separate from the power terminal, and the grounding pin will be disconnected last. This timing control of "grounding first, then power on, power off first, then grounding" ensures that there is always effective grounding protection during the entire plug-in and unplug operation, fundamentally eliminating the risk of electric shock.
The Brazil Power Plug adopts a standardized three-hole layout, with the two circular sockets on the top corresponding to the live wire and the neutral wire, and the large hole on the bottom is dedicated to the grounding pin. This spatial configuration conforms to the principle of ergonomics, which not only ensures the convenience of plug-in and unplug operations, but also strengthens safety protection through physical isolation. The grounding pin is usually designed in a cylindrical or flat sheet shape, forming a reliable electrical connection with the corresponding elastic contact piece in the socket. Its contact pressure and conductivity have been strictly tested to ensure that a stable grounding effect can be maintained in various use environments.
The design of this product strictly follows the NBR 14136 mandatory safety standard, which clearly stipulates the technical parameters of the plug grounding system: the grounding pin must be of specific size and material, the grounding resistance value must not exceed 0.1 ohm, and it must pass 10,000 plug-in durability tests. These technical indicators together constitute the quality benchmark for Brazil's power plug grounding system, ensuring that all plugs that meet the standards can achieve a safe and reliable grounding connection in the Brazilian electrical system, providing consumers with safety protection that complies with regulatory requirements.
EN 
中文简体
English
Deutsch
